matt epoxy powder coating PD-1002

Introduction This series of products are mainly made of saturated polyester resin and acrylic resin. Feature Gloss can reach 2-5%(60), soft and comfortable Good flowing property,smooth appearance and flat handle Suitable for long-term outdoor usage Good impact resistance Good resistance to baking-yellowing Reasonable price and low cost Uses Outdoor lighting Housing facilities Building materials Other outdoor low-glossy coating Apply Condition Outdoor glossless powder coatings are specially suitable for coating following equipment: Corona electrostatic spray coating Electrostatic-fluidized bed painting Fluidized bed Triboelectrification coating Thickness 40 150μm,recommended thickness is 50 80μm. Baking conditions See the following chart Physical Property S.G 1.4-1.8g/cm3(ingredient&color demand) Granularity Distribution standard:average granularity is 35-40μm,<10μm powder<10%, >90μm powder<0.5%. Coating Film Property All the tests are using 0.8mmcold rolling sheet,Thickness: 50-80μm. Mechanical properties Pencil hardness GB/T 6739-1996 H-2H Adhesion(cross-cut) GB/T 9286-1998 0 grade Bend test GB/T 6742-1986 ≤2mm Impact strength test GB/T 1732-1993 ≥50kg.cm Cupping test GB/T 9753-1988 ≥6mm Corrosion resistance Salt fog test GB/T 1771-1991 500h Humid heat test GB/T 1740-1979 1000h Temperature resistance 100/48h (white anel) color retention E≤0.6 Weather resistance Accelerated light aging testQUV-B313 (240h,8h/60 lighting,4h/50 rain) GB/T14522-1993 gloss retention rate≥80%,no change with color. Packing Double PP bags, N.W 20kg/carton Storage 12 months within 30,avoid direct sunlight. Health and Safety Refer to the MSDS.